E-KAM standard IP camera is designed specifically for high-quality and affordable network-based monitoring. It combines high performance with value-added features such as built-in connection assistant server, web server, embedded Linux operate system, activity detection and pre-/post-alarm recording. Plus, because it is similar in size to common CCTV cameras, you can install them using 8-inch camera housings. Equipped with Sony progressive scan CCDs and advanced DSP technology, this produce high-resolution images and deliver excellent color reproduction capabilities. It also supports advanced MPEG4-ASP and MPEG4-SP compression formats for great flexibility when configuring your network environment or choosing an application. For further efficiency and effectiveness in operating your IP monitoring system, this product offers a simultaneous access capability, a multicasting feature, and a choice of network security functions such as IP filtering and password protection. If you want an affordable, feature-rich solution for your IP-based security and surveillance applications, the E-KAM standard IP camera is a perfect choice.
KEY FEATURES
++Support DDNS Server and assistant connection server，the device can be accessed accurately and easily over network, though the device use a dynamic IP address.
++Support different image streams decoded and transmit,in order to save the system and network resources.
++Support adaptive rate control function.
++Support remote decode, the image decoded will be output to a TV set or monitor in turn. Dwell time of a image can be set.
++Support web server function， to be accessed expediently.
++Built-in embedded Linux operation system, support download the software, upgrade and set the device.
++Support fault detection, recovery and automatic connection.
++Multi-protocols support: TCP，UDP，HTTP，PPPoE，DHCP，DNS，AGMP，TFTP
++Compact and Slim : Design inherited from CCTV cameras, Fits 8-inch camera housings
++Equipped with Sony progressive scan CCDs and advanced DSP technology ?provides clear and detailed images while maintaining high sensitivity.
++Variety of power options: DC 12 V, or PoE (Power over Ethernet).
++Choice of compression formats: advanced MPEG4-ASP. MPEG4-SP
++Limits data bit rate while maintaining high-quality images, Ideal when network bandwidth is limited, Useful for calculating the required bandwidth during installation
++Alarm function ?with activity detection and pre-/post-alarm recording modes Bi-directional audio function
CAMERA
++Image Pick-up Device: Refer to the ORDER INFORMATIONS
++Total Pixels: 811(H) x 508(V)
++Effective pixels: 720(H) x 494(V) or 510(H) x 494(V)
++Scanning System: 2:1 Interlace 525Lines / 60 Fields / 30 Frames
++Synchronization: Internal / Line Lock selectable
++Scanning Frequency: Horizontal: 15734 KHz / Vertical: 59.94 Hz
++Horizontal Resolution: Color: 420TVL or 480TVL
++S/N Ratio (Y signal): 50dB (AGC off, Weight on)
++Min. Illumination: Refer to the ORDER INFORMATION
++Gain Control: Auto
++White Balance: ATW / AWC / Manual selectable (1800°K~10500°K)
++Electronic Shutter Speed: Auto / Manual selectable (1/60~1/120000sec)
++Sens-up: On / Off (Selectable limit ~ 128X)
++Motion detection: MD1 / MD2 / Off selectable (Built-in alarm output connector)
++Privacy Function: On / Off selectable (4 Programmable zones)
++Iris Control: DC / Video
++Lens Mount: C / CS mount (Easy or focus type)
IMAGE
++Compression format : MPEG4-SP / MPEG-4-ASP
++Maximum frame rate: MPEG4 : 30 fps (NTSC), 25 fps(PAL)
++Digital image resolution: D1(PAL: 720 x 576 \ NTSC: 720 x 480), CIF(352 x 288)
++Image encoded bandwidth: 64kbps~4Mbps
++Bit rate adjustment: Variable Bit Rate (VBR) or Constant Bit Rate (CBR)
++Image parameter adjustment: Quality, Contrast, Brightness, Hue and Saturation
++Caption Overlay: Support date and time texts overlay on image and the positions of the texts can be adjusted.
NETWORK
++Ethernet type: 10/100 Base-TX
++Protocols: TCP、UDP、HTTP、PPPoE、DHCP、DNS、AGMP、TFTP
++Number of clients: MPEG-4: 10
INTERFACE
++Ethernet: 10Base-T/100Base-TX (RJ-45)
++I/O port: 5 GPIO connectors for Input or Output
++Communication connector: 1 RS-232 selectable
++External microphone input: Mini-jack (monaural, 2.2 K2.5 V plug-in power)
++Audio line output: Mini-jack (monaural), max output level: 1 Vrms |
|
|
|
|
